Skip to content

Get started

This tutorial is meant to get you started on Pantavisor and Pantahub set up and development with ready-to-use Raspberry Pi pre-compiled images.

IMPORTANT: To follow this guide, you will need a Raspberry Pi 3 B+, but the process will be similar with any other model of Raspberry Pi 3 or Raspberry Pi 4. If you don't have one of these, you can still check how to install other images, such as an emulated Malta with QEMU, or build your own image.

Assuming you have already gone through our prerequisites section, we are going to get us started with these three simple steps:

  1. Image setup: download and flash our pre-compiled Pantavisor image on a SD card.
  2. First boot: insert the SD card in the board slot and boot it up.
  3. Claim your device: claim your running Pantavisor device on Pantahub.

After this, you will be able to remotely manage your newly claimed device using Pantahub. Check out our how-to guide on maintaining your device for further instructions on how to develop and deploy software on your product.